62
LD Platform Peripherals Guide
13732-000 Rev J
5.3 Call/Door Box Configuration
Wired (Ethernet) + Int Status
This screen shows you the wired network interface status.
Figure 5-7
Wired Interface Status Screen
Wired (Ethernet) + Int Configuration
This screen lets you configure the wired network interface.
Figure 5-8
Wired Interface Configuration Screen
1. Enter an IP address for this call/door box.
Each call/door box is a node on the network, and needs its own IP address.
An explicit mask may be entered, but is not required.
2. Click Store Permanent to write the configuration change to flash.
The information panel will reflect the changes you made.
3. Put a temporary label on the front of the call/door box with its IP address.
This will be useful when you need to enter the IP address into MobilePlanner.
