7. Descriptions of Operation
KP100L Quick Installation Guideline
23
7. Descriptions of Operation
■
Procedure at the First Time Operation
The procedure at the first time operation shows below.
(1) Connect the Solar modules to the KP100L.
(2) After the LCD becomes the display of the country setting, set a specified country.
(3) Make sure that the display of the country setting is correct.
(4) After turning OFF the AC breaker, wire the AC to the KP100L.
(5) Turn ON the AC breaker.
(6) Make sure that the KP100L starts running as indicated by the LCD..
■
Country Setting
Procedure of the Country Setting
WARNING
After once setting the country setting, you can’t change the country setting.
Be careful when you set it.
Significant property damage may possibly occur. Do not use the product
with a mistake of the country setting. Contact store purchased when you fix
the country setting by mistake.
The display moves to the display of the setting of the country when you start KP100L with Country
Setting not fixed. Refer to the figure below for setup. Table shows the relation between the menu and
the country. You can’t set the country other than countries shown in the table. The KP100L complies
with local and national standards when correct country is selected.
Refer to User’s manual for the detect level in each country.
Menu
[GER]
[FRA]
[GRE]
[CZE]
[DEN]
[TUR]
[RSA]
[ESP]
[POR]
[ITA]
Country
Germany
France
Greece
Czech
Republic
Denmark
Turkey
Republic
of South Africa
Spain
Portugal
Italy
Display[1]
Displays the data name of Display [3]
Display[2]
Displays the status data.
Lit when the
KP100L is
running.
Lit when the
KP100L error
occur.
Display[3]
Displays measurement value,
error content and set value
that user selected.
Changes
display modes.
Changes (Reverse-sending) the
display mode and set value.
Changes (Order-sending) the
display mode and set value
Enter the display
mode and set value.
