![background image](http://html1.mh-extra.com/html/omron/k3np/k3np_operation-manual_743364074.webp)
65
Follow the steps described below to set the following.
H: 100.00
L: 1.00
(Assume that the decimal point is set between the 2nd and 3rd digit from the right in the
prescale menu.)
Set Value LED Display Model
Basic Model
1, 2, 3...
1. Press the Mode Key for more than one second while the
opt
option menu is
displayed. The
aUg
process time for averaging measured value setting will
appear.
Set Value LED Display Model
Basic Model
2. Repeatedly press the Mode Key until the
lset.h
H linear output range set-
ting is displayed.
Set Value LED Display Model
Basic Model
3. Press the Shift Key to display the prior set value
999.99
for changing. The
PROG indicator will flash.
Set Value LED Display Model
Basic Model
4. Press the Up and Shift Keys to set the value to
100.00
. The setting will be
validated automatically if no change is made for five seconds. The
lset.h
H
linear output range setting will be displayed again.
Note
Press the Mode Key to enter the set value immediately. The next pa-
rameter will be displayed for setting.
+
Set Value LED Display Model
Basic Model
5. Press the Mode Key to display the
lset.l
L linear output range setting.
Set Value LED Display Model
Basic Model
SETTING
EXAMPLE
Setting Mode
Section 4-2
Содержание K3NP
Страница 1: ...K3NP Period Meter Operation Manual Produced January 1998...
Страница 2: ...iv...
Страница 4: ...vi...