![background image](http://html1.mh-extra.com/html/omron/k3np/k3np_operation-manual_743364035.webp)
26
Performance Characteristics
Accuracy of measurement
±
0.08% rdg
±
1 digit (ambient temperature: 23
°
C
±
5
°
C)
Measurement range
10 ms to 3200 s
Response time of HOLD input
20 ms max.
Recovery time (T
R
)
20 ms min.
ON/OFF pulse width
Sensor with transistor output: 9
m
s min.
Sensor with relay output: 15 ms min.
Response time
Output configuration
Relay output
Transistor
output
BCD and
transistor output
Linear and
transistor output
Communication
and transistor
output
Comparative output
25 ms max.
20 ms max.
35 ms max.
35 ms max.
20 ms max.
BCD output
---
---
Refer to page 93.
---
---
Linear output
---
---
---
40 ms max.
---
The response time of the HOLD input is the time required for the K3NP to
accept HOLD input after the HOLD input turns ON. This is illustrated in the
following diagram.
Recovery Time (T
R
)
Recovery time is the period required for the K3NP to become ready for the
next measuring operation after a measuring operation is completed. For tran-
sistor output Models, comparative output remains ON during recovery time.
For other models, comparative output requires more time to turn ON. When
the comparative output terminals of the output board and the HOLD input
terminals are connected, set a sufficient recovery period, considering the re-
sponse time of the HOLD input. This is illustrated in the following diagram.
Measurement
starts
Measurement
completed
Comparative output
Delay in comparative
outputs
HOLD input
Acceptance of
HOLD input
Recovery time
(20 ms min.)
Response time of HOLD input
(20 ms max.)
T
1
T
2
Response Time of HOLD
Input
Time Difference:
f3
Section 3-3
Содержание K3NP
Страница 1: ...K3NP Period Meter Operation Manual Produced January 1998...
Страница 2: ...iv...
Страница 4: ...vi...