Omron K3NH Скачать руководство пользователя страница 29

Страница: 29 / 120

3-2

Setting Mode

3-2-1 Selecting Setting Mode

•

The K3NH in RUN mode will go into setting mode if the Mode Key is pressed for
1 s minimum.

•

The K3NH in setting mode will go into RUN mode if the Escape Key is pressed.

RUN mode

Press the Mode and Shift Keys
while turning the K3NH on.

Power On

Press the Escape and Up
Keys for 1 second.

Maintenance mode

RUN mode

1 second

Setting mode

Protect mode

•

The menu in each mode changes whenever the Mode Key is pressed.

•

If the Mode Key is pressed for more than one second while a menu is dis-
played, a parameter will be displayed.

•

The parameter changes whenever the Mode Key is pressed.

•

If the Shift Key is pressed while a parameter is displayed, the parameter will be
ready to change.

•

Press the Up Key to change parameters.

•

The digit of a set value is selected with the Shift Key and changed with the Up
Key.

•

The PROG indicator is lit while a menu or parameter is displayed.

•

The PROG indicator flashes during a set value change.

Note If the input type is changed, all the other parameters will be set to default values.

Therefore, set the input type first.

Setting Mode

Section 3-2

AUDIN - 7 bis rue de Tinqueux - 51100 Reims - France - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : [email protected]

Содержание K3NH

























































































































Результаты поиска

Содержание K3NH

Отзывы:

Похожие инструкции для K3NH

Бренды по названию

Популярные бренды

Omron K3NH, Руководство по эксплуатации

Результаты поиска

Содержание K3NH

Отзывы:

Похожие инструкции для K3NH

Бренды по названию

Популярные бренды