background image

3

Refer to Remote/Local Programming, page 56.

Average Processing

Average processing prevents the display from fluctuating due to unstable input.
Simple average processing or movement average processing can be selected.

Refer to Average Processing, page 39.

1-2

Front of the Meter

Comparative output
status indicators

PV display

Mode Key

Status indicators

SV display status
indicators

Teaching indicator

Unit of measure

SV display

Shift Key

Escape Key

Up Key

RESET/TEACH Key

Five-digit (–19999 to 99999), seven-segment, 14.2-mm-high LED display with a
programmable decimal point.

The displays show the process value, maximum value, minimum value, opera-
tions/parameters when setting, and error messages.

PV Display

K3NH-

jjj

A Basic Model

RUN Mode:

Displays the process, maximum, and minimum values. Also
displays setting values while the SV indicator is lit. When
changing a value, all digits other than those that can be set be-
come dimmer.

Setting Mode:

Displays the menu, parameter, or setting value. When chang-
ing a value, all digits other than those that can be set become
dimmer.

K3NH-

jjj

C Set Value LED Display Model

RUN Mode:

Displays the process, maximum, and minimum values.

Setting Mode:

Displays the menu and parameters.

RUN Mode:

Displays comparative setting values. When changing a value,
all digits other than those that can be set become dimmer.

Setting Mode:

Displays setting values. When changing a value, all digits other
than those that can be set become dimmer.

Indicates the status of the comparative output.

SV Display (Setting value
LED Display Models Only)

Comparative Output Status
Indicators

Front of the Meter

Section 1-2

AUDIN - 7 bis rue de Tinqueux - 51100 Reims - France - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : [email protected]

Содержание K3NH

























































































































Отзывы: