Initial Setup
Section 4 Initial Setup
4-2
4.1 Initial Setup Example for the K3HB-R
The initial setup is explained in the following example.
Settings Example
• A proximity sensor that outputs eight pulses per rotation is used to
detect the teeth on a gear and the rotation speed of the roller is
displayed in rpm.
• If the measurement value goes above 700 rpm, comparative
output H turns ON.
• If the measurement value goes below 500 rpm, comparative
output L turns ON.
Setting the Prescale Value
Prescale value (
α
) = 1/8 = 0.125 = 0.125
×
10
−
0
Prescale value of Input A, X (mantissa):
ps.
ax
=
0.
1250
Prescale value of Input A, Y (exponent):
ps.
ay
=
10 00
Initial Setup Flow
●
To change a set value, press the
S
[SHIFT] Key once to enable
changing the setting and then press the
U
[UP] Key to change the
value.
Press the
M
[MODE] Key to register the set value. The set value will
be registered and the next parameter will be displayed.
• The display will show “0”.
1. Move to the initial setting level by pressing the
L
[LEVEL] Key for at least
3 s (operation will stop).
2. Set “
func
” to “
f1
” and press the
M
[MODE] Key.
1. Set input type A “
in-ta
” to “
00
” and press the
M
[MODE] Key.
A
Check the wiring and turn the power ON.
B
Set the function to F1 (rpm/circumferential speed).
500
700
Comparative output H
Comparative output L
Measurement
value
K3HB-R
C
Set input type A to 00 (no-contact, normally open).
Содержание K35-2
