Omron HBF-206IT, Инструкция по эксплуатации

Страница: 36 / 44

36
ERROR INDICATORS
ERROR
DISPLAY
CAUSE CORRECTION
Your feet are not positioned over
the electrodes correctly.
Make sure you are barefoot.
Make sure your soles of your feet are clean and
dry.
Make sure your feet are correctly positioned.
Refer to POSTURES TO AVOID DURING
MEASUREMENT on page 26.
The measurement position was not
stable.
Your feet were not placed correctly.
Remain still and do not move until the
measurement is complete.
Refer to POSTURES TO AVOID DURING
MEASUREMENT on page 26.
Your feet are too dry.
Slightly moisten your soles of your feet with a
damp towel and retake the measurement.
Device error.
Turn the monitor off, and on again. Take the
measurement.
If this error still occurs, consult your OMRON
service representative.
You stepped onto the measurement
platform before 0.0 lb was
displayed.
Wait until 0.0 lb is displayed before stepping
onto the measurement platform.
The monitor was moved before
0.0 lb was displayed. Do not move the monitor until 0.0 lb is
displayed.
Movement during measurement. Do not move until measurement is complete.
Monitor detected weight over
330.0 lb. This monitor can only be used by people
weighing less than 330.0 lb.
HBF-206IT-Z_B_M.fm Page 36 Monday, February 22, 2010 4:24 PM