Omron HBF-206IT, Инструкция по эксплуатации

Страница: 29 / 44

29
HOW TO MEASURE WEIGHT ONLY
1. Press the WEIGHT/OFF button to turn the
monitor ON.
The current date appears on the display, then the
display changes to 0.0 lb.
Wait until 0.0 lb appears on the display.
NOTES:
• If you step onto the monitor before 0.0 lb appears
on the display, an error message “Err” will appear.
• You can change the measurement units used for
the height and weight settings. Personal data and
measurement results in memory will be displayed
by selected setting. To change the measurement unit:
1) Keep the GUEST/ MEMO button pressed until “lb” and “kg” blink on the display.
2) Press the GUEST/ MEMO button to select the desired measurement unit, “lb” or “kg”.
This will automatically change “cm” and “feet/inch” under height setting
.
3) Press the SET/MODE button to confirm the change.
2. Step onto the unit.
Stand with your weight evenly distributed on the measurement
platform.
Remain still and do not move until the measurement is
complete.
3. Check the measurement result.
The display will show your weight and then the weight result
will blink twice.
4. Step off the unit.
5. Press the WEIGHT/OFF button to turn the monitor off.
HBF-206IT-Z_B_M.fm Page 29 Monday, February 22, 2010 4:24 PM