Omron HBF-206IT, Инструкция по эксплуатации

Страница: 32 / 44

32
TRANSFERRING THE DATA
You can transfer measurement data to a Bluetooth
®
wireless technology device.
You can transfer up to 30 sets of stored measurement results for each personal profile number.
The content and display for the measurement results may vary depending on the application used to view them.
For details, refer to the manual provided with the application you are using.
REGISTERING THE UNIT WITH THE DESTINATION DEVICE (PAIRING)
What is Pairing:
This refers to the procedure for registering the unit with the device so that it can be used to transfer data.
Pairing is required when a device is connected to the unit for the first time, or if the same device is used
to transfer data for a different personal profile number.
Follow the procedure below to pair the unit with the destination device.
Refer to TRANSFERRING THE DATA on page 33 for information about transferring the data with a
device that has already been paired with the unit.
1. Display the measurement results.
Pairing (Registration) after taking a measurement:
Refer to HOW TO TAKE A MEASUREMENT on page 25, to display the
measurement results.
Pairing (Registration) without taking a measurement:
Refer to VIEWING THE LAST MEASUREMENT RESULTS on page
30, to display the results for the last measurement.
Pairing (Registration) when using GUEST mode:
You can also start pairing after taking a measurement using GUEST mode.
Refer to HOW TO TAKE A MEASUREMENT on page 25, to display the measurement results.
2. Enable pairing (registration) on the device.
Set the application on the device ready for pairing.
For details, refer to the manual provided with the application you are using.
Buttons Used in this Procedure
UPLOAD button
Press this button to transfer the data
to a
Bluetooth ® wireless technology
device.
Press and hold to register a
destination device.
HBF-206IT-Z_B_M.fm Page 32 Monday, February 22, 2010 4:24 PM