Camera Setting Option List
You can perform detailed camera settings in [3D Camera Image Input]. The following
items are available for camera settings. For details and settings of each item, see the
respective reference page.
Note
The setting options differ depending on the camera type and lighting mode.
Camera/Lighting Combination and Available Functions
Table: Camera Setting Option List
Item
Description
Camera setting
Specify the camera settings such as the shutter speed or flashlight.
[Camera N: Camera setting (3D Camera Image Input)]
Camera settings
Specify the shutter speed and the camera gain.
Camera settings
Frame/Field
Select the unit to be treated as one image. This area is displayed
only when a monochrome camera is used.
Frame/Field - for Monochrome Cameras Only
Number of lines
to be read
Narrow the image range to be scanned.
Number of Lines to be Read
Electronic flash
setting
Specify flashlight settings.
Electronic Flash Setting
Screen adjust
Adjust the lighting and the lens.
[Camera N: Screen Adjust (3D Camera Image Input)]
Lighting control
Adjust the amount of light (brightness) of the lighting.
Lighting Control
Lens setting
Adjust the camera zoom, focus, and iris.
Lens Setting (When Connecting an Intelligent Camera or an
Auto-focus Camera)
Common setting
for all cameras
Set the target area to apply the automatic setting for focus, iris, and
white balance, and specify the iris base density.
Common Setting for All Cameras (When Connecting an
Intelligent Camera or an Auto-focus Camera)
White balance
Adjust the white balance.
[Camera N: White Balance (3D Camera Image Input)]
Calibration
Set when measurements (measurements in camera coordinates) are
to be output in actual dimensions. Select the calibration setting
method and generate the calibration parameters.
[Camera N: Calibration (3D Camera Image Input)]
Содержание FZ2 Series
