Example
for Input:
10100010
Scenegroup
switch
Switch
measurement
scene group.
1
11
Input "Scene
Group No." in
binary format.
Switches
to scene
group 2.
Example
for Input:
11100010
0: OFF 1: ON
Note
ERROR signal is ON if input command isn't received correctly.
Important
When parallel continuous measuring is engaged and continuous STEP signal is
inputted, switching of scene group should be avoided. To switch a scene group,
uncheck "Save scene group when switching" by either of the following methods.
o
The Switch Scene Group window
Switching the Scene Group
o
[Measure setting] in the [Measure] menu
Setting for Measurement
Output Format
Output the measurement results whenever performing measurement. The result is output
only if "Output" of [Test Measurement setting] in the "Control" area is checked.
Setting for Measurement
When judgemnet results are either OK or NG, it's possible to choose output ON. Ex-
factory setting is "ON if NG".
Setting Communication Specifications (Parallel Interface)
Table: Output Format (Parallel Interface)
Signal
Output Contents
OR
Signal
Output comprehensive Judge
Parallel Judgement Output
The results of Judge 0 to 15 set in [Parallel Judgement Output] are output to
DO 0 to 15.
Processing Items List Manual, "Parallel Judgement Output"
DO 0 to
15
signal
Parallel Data Out
Value of Data 0 to 7 in [Parallel Data Out] are output in 16-digits format.
Processing Items List Manual, "Parallel Data Out"
Содержание FZ2 Series
