3. Using the Unit
15
Note:
• Move the probe lens as close to the object as possible when using in surface measurement mode (0.4 inches (1
cm) apart is recommended). Do not touch the probe lens to the object directly.
• Surface measurement mode shows the surface temperature reading. The surface and internal temperature may
be different. Make sure it is safe when measuring an object with extremely high or low temperature.
• The display does not light up and the buzzer is off when using this mode.
• To switch to forehead measurement mode, go back to step 2 and make sure the
icon changes to the icon.
• To manually finish surface measurement mode, press and hold the [ON/MEM] button until “OFF” appears on the
display. The device will automatically switch to room temperature mode and the room temperature will appear
back on the display.
• If no additional surface measurements are taken, after 1 minute the device will automatically switch to room
temperature mode and the room temperature will appear on the display.
• Surface measurement mode is not intended for body temperature measurement or medical use.
•
To prevent damage to this thermometer, DO NOT
use this thermometer to measure any item with a
temperature higher than 176.0 °F (80.0 °C).
•
DO NOT
used this unit other than for measuring human forehead temperature and/or surface measurement
and/or room temperature.
• When taking the temperature of an object with low emissivity such as gold or aluminum, inaccurate readings
may result.
• When taking the temperature of something with low emissivity (such as milk) in surface measurement mode,
slightly lower readings may result.
