4. Troubleshooting and Maintenance
21
3. There are variances in the measurement values.
• Measurements were not taken at the same location.
• The probe lens is dirty.
4. The temperature measured on this unit is not equivalent to oral-temperature.
• No-Touch Forehead Thermometer may not always calculate the exact oral-equivalent value.
It is recommended to take regular oral measurements on subjects such as family members, etc., who are in
good physical condition, to know their normal temperature.
4.3
Maintenance
• Check the unit can be operated properly if it is dropped. If unsure, please contact OMRON customer service to
have the unit checked.
• When the probe lens becomes dirty, wipe it lightly with a soft dry cloth or a cotton swab.
Do not wipe the probe lens with tissue paper or a paper towel.
• Clean the probe lens carefully to avoid damaging it.
- Use a 70 to 75 % alcohol swab or soft cotton moistened with 70 to 75 % alcohol to clean the probe lens.
- Allow the probe lens to fully dry for at least 1 minute before use.
• To avoid damage to the unit, do not store the unit in places such as:
- Wet locations.
- Locations with high heat and humidity or those that are exposed to direct sunlight.
- Areas close to heating equipment, dusty locations, or environments where there are high salt concentrations
in the air.
- Locations where the unit will be tilted, falling, shock, or vibration.
- Pharmaceutical storage areas or locations where corrosive gases are present.
