Omron E5EK, Руководство пользователя

Страница: 138 / 203

CHAPTER 5 PARAMETERS
E5EK
5--48
Communication stop bit
Communication data length
Communication parity
Communication baud rate
Communication unit No.
Conditions of Use
The communications function must be in
use.
•
These parameters are enabled when the power is turned ON again.
•
These parameters set the communications conditions. Make sure that the stop bit,
data length, parity and baud rate of the host computer and the E5EK-T controller
are matching.
•
When connecting two or more E5EK-T controllers to the host computer, set unit
Nos. that will not conflict with the unit Nos. of other controllers.
•
“Communication stop bit” parameter
Setting Range
Unit Default
1, 2 Bits 2
•
“Communication data length” parameter
Setting Range
Unit Default
7, 8 Bits 7
•
“Communication parity” parameter
Setting
Default
“ ”: None/ “ ”:Even/“ ”:Odd
•
“Communication baud rate” parameter
Setting Range
Unit Default
1.2, 2.4, 4.8, 9.6, 19.2 kbps 9.6
•
“Communication unit No.” parameter
Setting Range
Unit Default
0 to 99 None 0
F
Related description
Chapter 6 Using the Communications Functions
F
Related parameter
“Remote/Local” (level 2 mode)
F
Option units
E53-AK01/02/03
Option Mode
Function
Setting
See
Model