![background image](http://html.mh-extra.com/html/omron/e5-n-series/e5-n-series_solutions-manual-for-faqs_742548004.webp)
Simplicity on the Worksite
Solutions Guide for FAQs: E5
@
N
Setting the Sensor Type
1-2
Setting the Se
nsor T
ype
You set this parameter in the Initial Setting Level.
The parameter is set to 5 (K thermocouple at
−
200 to 1,300 °C) by default.
1
Setting the Sensor Type
Press the (Level) Key for at
least 3 seconds.
Operating Display
Change the set value with the
(Up and Down) Keys.
←
in-t
(IN-T): Indicates the Input Type parameter.
←
Default setting is
5
(5): K thermocouple at
−
200 to 1,300 °C.
Initial Setting Level
←
in-t
(IN-T) will be displayed to show
that the Initial Setting Level has been
entered.
Press the Key for at least 3 seconds.
←
Flashes 3 times.
2
Set the parameter with the Keys.
←
If a sensor is not connected or if the setting of the
Input Type parameter does not agree with the
connected sensor,
s.err
(S.ERR: Input Error) will
flash on the display when the power supply is
turned ON.
If the sensor is not connected, connect it now.
←
Input Type: 0 (Pt100 resistance thermometer at
−
200 to 850 °C) (example)
Set the number that you selected for the
Input Type parameter on page 1-1.
3
Turn ON the power supply.
Initial Setting Level
Initial Setting Level
1
(When finished, press the (Level) Key for at least 1 second to return
to the operation display.)
Содержание E5*N Series
Страница 31: ...MEMO ...