![background image](http://html.mh-extra.com/html/omron/e5-n-series/e5-n-series_solutions-manual-for-faqs_742548024.webp)
Simplicity on the Worksite
Solutions Guide for FAQs: E5
@
N
Setting Temperature Alarms
4-10
Setting T
empe
rature Alarms
You set this parameter in the Initial Setting Level. The parameter is set to 0.2°C by default.
2
Setting the Hysteresis
Turn ON the power supply.
1
Press the (Level) Key
for at least 3 seconds.
Press the (Mode)
Key several times to
display
alh1
(ALH1).
Operating Display
Change the set value
with the (Up and
Down) Keys
If required, use the (Mode) Key and the (Up and Down) Keys to repeat steps 3 and 4 and
set the hysteresis for
alh2
(ALH2) (Alarm 2 Hysteresis) and
alh3
(ALH3) (Alarm 3 Hysteresis)
(The number of alarms that is supported depends on the model of Temperature Controller. Some of
the alarm parameters may not be displayed.)
alh1
(ALH1):
←
Indicates the Alarm 1 Hysteresis parameter.
←
Default setting is 0.2°C.
Initial Setting Level
←
in-t
(IN-T) will be displayed to
show that the Initial Setting Level
has been entered.
Press the Key for at least 3 seconds.
Initial Setting Level
2
Change the parameter with the Key.
3
Set the parameter with the Keys.
4
Initial Setting Level
(When finished, press the (Level) Key for at least 1 second to return to the operation display.)
Содержание E5*N Series
Страница 31: ...MEMO ...