![background image](http://html1.mh-extra.com/html/omron/cx-profibus-1-0/cx-profibus-1-0_operation-manual_744199029.webp)
14
CX-Profibus Configurator
Section 1-3
CS1/
CJ
1W
-P
RM
2
1
DTM
Device setup
Device setup allows the user to:
• Select the PROFIBUS Master Unit’s unit number.
• Configure the communication link between the PC and the Unit. This
function invokes the user interface of CX-Server.
• Test the Units communication link and read out the Unit’s information.
Master setup
It allows enabling of Auto Addressing, to facilitate I/O data mapping, as
well as defining the Unit’s behaviour in case of
• a network malfunction.
• a PLC mode change between PROGRAM and RUN/MONITOR
mode.
Bus parameter setup
The bus parameter setup allows the selection of baud rate and calcula-
tion and editing of specific bus parameters.
Slave area setup
The Slave area setup allows the user to define the I/O Data mapping of
the I/O Data from each of the slave devices on to the PLC memory
areas.
Monitoring functions
• Master status read out.
• Slave status and slave diagnostics read-out.
• Read out of the Unit’s error log.
Additional Master functions
• Set remote slave address.
• Provide communication channels for PROFIBUS DP-V1 MSAC1
messages.
Note
These functions are implemented as of Unit version 2.0.
Support functions
• Context sensitive help functions.
• Multi-language support.
C200
HW
-P
RM21 DTM
Bus parameter setup
The bus parameter setup allows the selection of baud rate and calcula-
tion and editing of specific bus parameters.
Address mapping setup
The address mapping setup shows an overview of the mapping of the I/
O data of each Slave on to the Unit’s memory. The mapping can be
accomplished automatically, but the function also allows editing of indi-
vidual address mappings.
Monitoring functions
• Master status read out.
• Slave status read-out.
Support functions
• Context sensitive help functions.
• Multi-language support.
G
e
ner
ic
Sl
a
v
e
DTM
General functions
The Generic Slave DTM reads the contents of a specific GSD file
located in a special sub-directory, and displays the setup options to the
user. It supports
• GSD file revisions 1 and 2 (PROFIBUS DP functionality).
• GSD file revisions 3 (PROFIBUS DP-V1 functionality).
I/O configuration setup
The I/O configuration setup function allows:
• Selection of device address.
• Enable/disable watchdog.
• Overview of available I/O modules.
• Selection of I/O modules, including Addition, Insertion and Removal of
multiple modules.
Parameter setup
The Parameter setup function:
• Setting of common as well as module dependent parameters.
• Setting of PROFIBUS DP Extension parameters.
• Setting of PROFIBUS DP-V1 dependent parameters.
Group setting
The Group setup function allows definition of the group to which the
associated slave device will belong.
Monitoring functions
The Monitoring functions provides a display of
• Standard Slave diagnostics flags.
• Extended diagnostics messages.
Support functions
• Context sensitive help functions.
• Multi-language support.
Item
Specification
Содержание CX-PROFIBUS 1.0
