![background image](http://html1.mh-extra.com/html/omron/cx-profibus-1-0/cx-profibus-1-0_operation-manual_744199008.webp)
ix
About this Manual
This manual describes the CX-Profibus Configurator for the CS1W-PRM21 and CJ1W-PRM21
PROFIBUS DP and PROFIBUS DP-V1 Master Units.
This manual describes CX-Profibus and the PROFIBUS Master and slave DTM supplied with it. how to
operate it. These software components are required to control and operate the CS1/CJ1W-PRM21
PROFIBUS DP and PROFIBUS DP-V1 Master units. or more information on the CS1/CJ1W-PRM21
Master unit, refer to the CS1/CJ1W-PRM21 PROFIBUS Master Units Operation Manual (W409-E2-
@
).
Please read this manual carefully so that you understand the information provided before using CX-
Profibus and the PROFIBUS Master Units. Start with the precautions in the following section. They
describe the operating environment and application safety measures which must be observed prior to
and when using the PROFIBUS Master Unit.
The sections of this manual are as follows:
Section 1
introduces PROFIBUS and Cx-Profibus.
Section 2
describes Cx-Profibus and the DTMs in detail.
Section 3
describes the operational aspects of CX-Profibus.
Section 4
provides procedures for troubleshooting the PROFIBUS network and the Units.
The
Appendices
contain information supplementary to the information in the main body of the man-
ual. They are referred to in the various sections as required.
Manual
Products
Contents
Cat. No.
CS-series
Programmable Controllers
Operation Manual
SYSMAC CS-series
CS1G/H-CPU
@@
-E
Describes the installation and operation of
the CS-series PLCs.
W339-E1-
@
CJ-series
Programmable controllers
operation Manual
SYSMAC CJ-series
CJ1G-CPU
@@
Describes the installation and operation of
the CJ-series PLCs.
W393-E1-
@
CS/CJ-series
Programmable Controllers
Programming Manual
SYSMAC CS/CJ-series
CS1G/H-CPU
@@
-E, CJ1G-
CPU
@@
Describes the ladder diagram programming
instructions supported by CS/CJ-series
PLCs.
W394-E1-
@
CS/CJ-series
Programmable Controllers
Instructions Reference Manual
SYSMAC CS/CJ-series
CS1G/H-CPU
@@
-E, CJ1G-
CPU
@@
Describes the ladder diagram programming
instructions supported by CS-series and
CJ-series PLCs.
W340-E1-
@
CX-Programmer
Operation Manual
SYSMAC WS02-CXP
@@
-E
CX-Programmer
Provides information on how to use the CX-
Programmer, programming software which
supports CS1/CJ1-series PLCs.
W414-E1-
@
CX-Server
Run Time User Manual
CX-Server
Provides information on how to use the CX-
Server communication driver software
which supports CS1/CJ1-series PLCs.
W391-E2-
@
CS1/CJ1W-PRM21
Operation Manual
SYSMAC CS/CJ-series
CS1/CJ1W-PRM21
PROFIBUS DP Master Units
Operation Manual
Provides information on how to install and
use the CS1/CJ1-PRM21 PROFIBUS Mas-
ter units.
W409-E2-
@
C200H-series PROFIBUS DP
Master Units
Operation Manual
C200HW-PRM21 PROFI-
BUS DP Master Unit
Describes the Installation and Operation of
the C200HW-PRM21 PROFIBUS DP Mas-
ter Units.
W349-E2-
@
Содержание CX-PROFIBUS 1.0
