manualshive.com logo in svg

Omron CVM1D, Руководство по эксплуатации

Поделиться
Скачать
Omron CVM1D Скачать руководство пользователя страница 52

46

Word(s)

Function

Bit(s)

A502

00 to 07

Port #0 to #7 Enabled Flags

08 to 15

Port #0 to #7 Execute Error Flags

A503 to A510

00 to 15

Port #0 to #7 Completion Codes

A511

00 to 04

Current EM Bank (0 to 7)

05 to 14

Not used.

15

EM Installed Flag

Note

1. During duplex operation, the status of A008 through A015 will not agree in

the active and standby CPU Units.

2. For details about duplex initialization, refer to 

6-2-2 Duplex Initialization.

3. Do not use A50013 (Always ON Flag), A50014 (Always OFF Flag), or

A50015 (First Cycle Flag) to control execution of differentiated instructions.
The instructions will never be executed.

3-6-1 IOM Hold Bit

Bit A00012 can be turned ON to preserve the status of the CIO Area, Transition
Flags, Timer Flags, Timer PVs, index registers, data registers, and the Current
EM Bank Number when shifting from PROGRAM or DEBUG to MONITOR or
RUN mode or when shifting from MONITOR or RUN mode to PROGRAM or DE-
BUG mode. (I/O Memory includes the CIO Area, TR Area, CPU Bus Link Area,
Auxiliary Area, Transition Flags, Step Flags, Timer Completion Flags, and
Counter Completion Flags.)

When the IOM Hold Bit is OFF, the CIO Area, Transition Flags, Timer Flags, Tim-
er PVs, index registers, data registers, and the Current EM Bank Number are
cleared when switching between these modes.

If the IOM Hold Bit is ON, and the status of the IOM Hold Bit itself is preserved in
the PC Setup (Setting B, IOM Hold Bit status), then I/O Memory is also pre-
served when the PC is turned ON or power is interrupted.

3-6-2 Forced Status Hold Bit

Bit A00013 can be turned ON to preserve the status of bits that have been force-
set or force-reset when switching modes (except RUN mode). When the Forced
Status Hold Bit is OFF, bits that have been force-set or force-reset will return to
default status when switching between modes.

If the Forced Status Hold Bit is ON, and the status of the Forced Status Hold Bit
itself is preserved in the PC Setup (Setting B, Forced Status Hold Bit status),
then the status of bits that have been force-set or force-reset is also preserved
when the PC is turned ON or power is interrupted.

In any case, bits that have been force-set or force-reset will return to default sta-
tus when switching to RUN mode.

3-6-3 Error Log Reset Bit

Bit A00014 can be turned ON to clear the contents of the Error Log Area (words
A100 to A199), and reset the Error Record Pointer to 0. The Error Log Reset Bit
is automatically turned OFF after the Error Log Area is cleared.

3-6-4 Output OFF Bit

Bit A00015 can be turned ON to turn OFF all outputs from the PC. The OUT INH.
indicator on the front panel of the CPU will light.

3-6-5 CPU Bus Unit Restart Bits

Bits A00100 through A00115 can be turned ON to reset CPU Bus Units number
#0 through #15, respectively. The Restart Bits are turned OFF automatically
when restarting is completed.

Auxiliary Area

Section 3-6

Содержание CVM1D





















































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды