Omron CJ1W-SCU41, Руководство по эксплуатации

Страница: 386 / 526

367
K3T
#
Intelligent Signal Processor Protocol Appendix I
Read Set Value L (Continuous Units) (Sequence No. 320 (Hex
0140))
This sequence reads set value L for continuous units. The word allocation is identical to that of sequence No.
318 (Read Set Value HH (Continuous Units)).
Read Set Value LL (Continuous Units) (Sequence No. 321 (Hex
0141))
This sequence reads set value LL for continuous units. The word allocation is identical to that of sequence No.
318 (Read Set Value HH (Continuous Units)).
Read Set Value with Bank (by Unit Number) (Sequence No. 322
(Hex 0142))
Reads the set value of a bank which is not in use (K3TR: HH to LL, K3TC:01 to 05) and stores the results in the
specified words.
Send Data Word Allocation (3rd Operand of PMCR(260))
Offset Contents (data format) Data
+0 Number of send data words
(4 digits Hex) 0005 to 0062 (5 to 98 decimal)
+1 Number of units (4 digits Hex) 0001 to 0020 (1 to 32 decimal)
+2 Relevant unit No. (2 digits BCD) 00 to 99
+3 Bank No. (2 digits BCD) 01 to 04
+4 Operand (ASCII 2 characters) 4848 (“HH”), 4F31 (“O1”)
4820 (“H ”), 4F32 (“O2”)
4C20 (“L ”), 4F33 (“O3”)
4C4C (“LL”), 4F34 (“O4”)
4F35 (“O5”)
•
•
•
+ 97 Operand (ASCII 2 characters) Same as above
Relevant unit No. (Undefined)
(Undefined)
Number of units
+0
+1
+2
+3
+4
+95
+96
+97
Number of send data words First word of
send data
~
~
Relevant unit No. (Undefined)
Operand
Operand
Bank No. (Undefined)
Bank No. (Undefined)