LCD Digital Operator
LCD Digital Operator User's Manual v0_90 110218.doc
19
Issue 0.90 Draft
When the inverter supports EzSQ (Drive Programming) function
· In any display mode except Write Mode and Option Mode, the read screen is
displayed after pressing the
Key. If there aren’t parameters stored in LCD
digital operator, it will show “—“.
· Use the
or
key to move the cursor up and down to select the
memory number where parameter setting will be stored.
· After pressing the
key the Select data available are:
01: Read data
02: Read data+EzSQ
03: Verify data
04: Verify EzSQ
05: Cancel
NOTE: only three selection items 01, 03 and 05 are displayed when memory
No.2, No.3 or No.4 is selected.
· An overwritten confirming screen are displayed after the
key is
pressed. To approve, press the
key, if not, press the
key.
· The Read “Completed” will be displayed for 2 seconds.
· It returns to the Read Mode navigation layer automatically after the read
function is completed. The read operation date and time and inverter type will be
updated on the first line.
· Lines No. 2, No. 3 and No. 4 will display “E” as showed in the right figure.