LCD Digital Operator
LCD Digital Operator User's Manual v0_90 110218.doc
17
Issue 0.90 Draft
4.2 R/W Storage Mode - Single WRITE function
After pressing the
key in any display mode except Read mode and Option mode, the parameter
settings stored in LCD digital operator are transferred to the inverter. If the inverter supports EzSQ
(Drive Programming), it will be transferred to the inverter automatically after the parameter copy is
finished. It will return to the previous display after write function is completed.
When the inverter does NOT support EzSQ (Drive Programming) function
Parameter reading.
Read “completed” will display
for 2 seconds
When parameter write function is completed, it
will return to previous display automatically
When the inverter supports EzSQ (Drive Programming) function
When write is completed, it will
return to previous display
automatically
Parameter writing.
EzSQ (Drive Programming) writing.
NOTE:
Refer to chapter 4.6 for details.
