LCD Digital Operator
LCD Digital Operator User's Manual v0_90 110218.doc
12
Issue 0.90 Draft
3.4 Monitor-A Display Mode
1- Please select monitor mode A by using the
or
key at the
navigation layer. The cursor will be displayed in the Monitor-A pressing
the
key.
2- After that, use the
or
key to select the function code to be
displayed into the Monitor-A.
Use
or
key to move the cursor to the function code (F001
in this case) and use the
or
key to change the function code,
3- Use the
key to access to the function code value. With the
or
key the value can be changed. The changes will be
stored after pressing the
key or cancelled pressing the
key.
