35
•
EN
Bodypack transmitter
The bodypack transmitter can be used for wireless transmission of audio signals to a receiver module which
is tuned to the same transmission channel. Headset and lavalier microphones are available as accessories.
No.
Element
Function
1
Microphone input
3-pin mini XLR jack for connecting one of the optional microphones.
2
On/off switch
3
Battery indicator
If the indicator lights up red, the batteries are discharged.
4
Display
Indicates the transmission channel and the battery capacity:
5
Gain control
To correct the volume level of the bodypack transmitter. Reduce the
sensitivity if the volume of the transmitter signal is too high and thus
distorted. Increase the sensitivity if the volume is too low and a poor S/N
ratio results.
6
Transmission power
selector
HI = high power for a long range, yet reduced battery life, LO = reduced
range for a long battery life.
7
Buttons to set the
transmission channel
Press either button to set the channel; then the display will be flashing for
5 seconds.
8
Battery compartment
Fold up the cover and insert two 1.5 V AA batteries as indicated in the
compartment and replace the cover.
Note: If the bodypack transmitter is not used for a longer period, remove
the batteries to prevent damage in case of battery leakage.
1
2
3
5
7
4
6
8
