31
•
EN
No.
Element
Function
1
CD/MP3 player
Insertion module with remote control for retrofitting.
2
Receiver modules
Insertion modules for wireless audio transmission (16 channels in the
UHF ranges 823-832 and 863-865 MHz) with matching transmitters of
the MOM-10BT4 series.
3
Audio link module
Insertion module for retrofitting; for wireless operation of several
MOM-10BT4 systems. Via the audio link module, the master signal of the
primary system can be transferred to the receiving modules of further
systems.
4
Antenna input
Common BNC jack for receiver modules.
5
Pairing switch
Switches the paring mode of the built-in Bluetooth receiver on and off.
6
Bluetooth indicator
Flashes in pairing mode and lights continuously when the connection to
the Bluetooth source is established.
7
Level control
To mix the microphone signal of the corresponding MIC IN input to the
master signal.
8
Tone control
Adjusts the sound for the microphone inputs. In the left half the high
range is attenuated, in the right half the low range is attenuated.
9
Effect control
Adjusts the intensity of the internal reverb effect for the microphone
inputs.
10
Level control
To mix the line signal of the LINE IN jacks to the master signal.
11
On/off switch and level
control
Common power switch and level control for the Bluetooth receiver and
the CD/MP3 player.
12
Tone controls
2-band tone control for the master signal (BASS = low frequencies,
TREBLE = high frequencies).
13
Microphone inputs
Combined jacks (6.3 mm jacks/XLR) for connecting dynamic
microphones.
14
Line input
XLR jack and stereo RCA jacks for connecting devices with line level
(e.g. CD player).
15
Sliding switch
Switches the signal for the line input between stereo and mono source.
16
Link output
XLR jack to feed the mixed signal of all audio and wireless sources to
devices with line level inputs, e.g. another PA system.
17
Sliding switch
Selects the signal for the XLR link output (16) and the audio link module.
• STEREO MIX: The master signal is available as mono signal.
• MONO R: The right stereo signal of the master signal is available.
18
Master control
Adjusts the overall volume.
19
Fuse holder
Only replace the fuse when the device is disconnected from mains. Only
use fuses of the same rating and power.
20
Power input
Used to plug in the supplied power cord.
21
Charging indicators
Indicate the status for the rechargeable batteries. If the LOW LED lights
up red, the batteries should be charged. During mains operation the
LEDs are flashing when the batteries are being charged.
22
Voice priority switch
Switches the microphone priority function on, i.e. the volume of the other
audio sources will be substantially reduced during microphone
announcements.
23
Power switch
Switches the PA system on and off.
24
USB charging port
To charge the batteries of mobile devices up to max. 5V/2 A.
