Page 28
The
-s
switch displays the attributes associated with each port on the switch.
The
-ver
switch displays extended show status.
The
mo
command provides configuration of the fixed RJ-45 port. The
mo
command is a valid command
for the fiber ports (AN/Man only).
The RJ-45 port will operate per the Port Configuration Matrix below.
Port
DIP-switch
Port Attribute
mo setting
Port
Configuration
RJ-45 Mode of Operation
AN
1000, AN,
FDX
Based on the
link partner
The RJ-45 port is set to auto-negotiation with the following modes
advertised: 1000FDX, 1000HDX, 100FDX, 100HDX, 10FDX, 10HDX
AN
1000, AN,
HDX
Based on the
link partner
The RJ-45 port is set to auto-negotiation with the following modes
advertised: 1000HDX, 100FDX, 100HDX, 10FDX, 10HDX
AN
100, AN,
FDX
Based on the
link partner
The RJ-45 port is set to auto-negotiation with the following modes
advertised: 100FDX, 100HDX, 10FDX, 10HDX
AN
100, AN,
HDX
Based on the
link partner
The RJ-45 port is set to auto-negotiation with the following modes
advertised: 100HDX, 10FDX, 10HDX
AN
10, AN,
FDX
Based on the
link partner
The RJ-45 port is set to auto-negotiation with the following modes
advertised: 10FDX, 10HDX
AN
10, AN,
HDX
Based on the
link partner
The RJ-45 port is set to auto-negotiation and advertises: 10HDX
AN
1000, Man,
FDX
Based on the
link partner
The RJ-45 port is set to auto-negotiation with the following modes
advertised: 1000FDX (When set to 1000, the port is always in AN mode)
AN
1000, Man,
HDX
Based on the
link partner
The RJ-45 port is set to auto-negotiation with the following modes
advertised: 1000HDX (When set to 1000, the port is always in AN mode)
*
Man
100, Man, FDX
Man, 100, FDX
The RJ-45 port is set to manual negotiation and is forced to: 100FDX
Man
100, Man, HDX
Man, 100, HDX
The RJ-45 port is set to manual negotiation and is forced to: 100HDX
Man
10, Man, FDX
Man,10, FDX
The RJ-45 port is set to manual negotiation and is forced to: 10FDX
Man
10, Man, HDX
Man, 10, HDX
The RJ-45 port is set to manual negotiation and is forced to: 10HDX
RJ-45 Port Configuration Matrix
*NOTE: The switch only supports auto-negotiation when configured for 1000. So when the 1000,
Man, FDX or 1000, Man, HDX is used, the switch still auto-negotiate with its link partner per the
table above.
The Fiber port will operate per the Port Configuration Matrix below.
Port
DIP-switch
Port Attribute
mo setting
Port
Configuration
Mode of Operation
AN
AN
AN, 1000, FDX 1000M Fiber port set to AN with the followings mode advertised 1000FDX
Man
Man
Man, 1000, FDX 1000M Fiber port set to MAN and is forced to 1000FDX
Fiber Port Configuration Matrix
