Page 43
6.1.20 Display the Common Configuration Parameters (SHOWCONFIG)
The
showconfig
command display the commonly configured parameters on the switch. The parameters
that are displayed are:
ver
,
ip
,
port
,
protocol
,
time
,
module
,
pse
and
sfp
.
To display the parameters, use the
showconfig
command from the CLI prompt. A list of options is displayed
when the
showconfig -h
command is entered.
> showconfig -h
Description:
showconfig - show basic configuration information status
Syntax:
showconfig [-h]
showconfig -s [-ver]
Switches:
-h display help information
-s show current configuration
>
The options available using the
showconfig
command are shown below.
The
-h
switch displays the help screen presented above. It is static and provides help information for the
specific command.
The
-s
switch displays the current state of each
showconfig
parameter.
Use the
showconfig -s
command to display the configuration of the switch.
