Omnitron Systems Technology OmniConverter GPoE+/M, Руководство пользователя

Страница: 31 / 76

Page 31
6.1.11 Port Statistics (PORTSTAT)
The
portstat
command provides the ability to display the port statistics on the switch.
To display the port statistics, use the portstat command from the CLI prompt. A list of options is displayed
when the
portstat -h
command is entered.
> portstat -h
Description:
portstat - port statistic configuration
Syntax:
portstat [-h]
portstat -s -p pNum
portstat -clr -p pNum
Switches:
-clr clear port statistics
-h display help information
-p port number, [pNum]: {F1,F2,1..8|mgt1}
-s shows current status
>
NOTE: Port number selection will vary depending on the model.
The options available using the portstat command are shown below.
The -clr switch clears the current port statistics.
The -h switch displays the help screen presented above. It is static and provides help information for the
specific command.
The -p switch selects which port statistic will be displayed.
The
-s
switch displays the selected port statistics.
To display the port statistics for Fiber Port 1, use the portstat -s -p f1 command.
>portstat -s -p f1
Transmission Counters Receive Counters Receive Packets by Size
Packets 205 64 Octets 172
Total Octets 9556 Total Octets 14182 65-127 27
Good Pkts 64 Good Pkts 205 128-255 6
Pause Pkts 0 Pause Pkts 0 256-511 0
Unicast Pkts 27 Unicast Pkts 28 512-1023 0
Multicast Pkts 8 Multicast Pkts 177 1024-10240 0
Broadcast Pkts 29 Broadcast Pkts 0
Errored Pkts 0 Errored Pkts 0 Transmit Packets by Queue
Dropped Pkts 0 Dropped Pkts 0 Queue 0 64
Bad Events 0 FCS Errors 0 Queue 1 0
Deferred 0 Symbol Errors 0 Queue 2 0
Collisions: CRC/Alignment 0 Queue 3 0
Total 0 Undersized 0 Queue 4 0
Single 0 Oversized 0 Queue 5 0
Multiple 0 Fragments 0 Queue 6 0
Late 0 Jabber 0 Queue 7 0
Excessive 0 Alignment 0
Tx Throughput 0.001 Mbps Rx Throughput 0.001 Mbps
Tx Utilization 0.000% Rx Utilization 0.000%
>