Omnitron Systems Technology OmniConverter GPoE+/M Скачать руководство пользователя страница 36

Страница: 36 / 76

Page 36

6.1.15 Restore to Factory Defaults (RESTORE)

The

restore

command provides the ability to restore the switch to factory default settings.

Use the

restore

option from the CLI prompt to restore factory defaults. A list of options is displayed when

the

restore -h

command is entered.

> restore -h

Description:

restore - restore module defaults

Syntax:

restore [-h]

restore -s

restore -r rType [-keep]

Switches:

-h display help information

-keep restore all but IP based settings IP address, subnet, gateway

-r restore default, [rType]: {factory}

-s show current configuration

The options available using the

restore

command are shown below.

The

-h

switch displays the help screen presented above. It is static and provides help information for the

specific command.

The

-keep

switch maintains the current IP setting after the switch has been restored to factory defaults.

The

-r

switch restores the switch to factory defaults.

The

-s

switch displays the restore status.

To display the restore status, use the

restore -s

command.

> restore -s

Factory default file name: modelscfg.ini

Local definition file name: localdefs.ini

To restore the switch to factory default settings, use the

restore -r factory

command.

> restore -r factory

The switch will be rebooted and the factory default settings will be restored.

Содержание OmniConverter GPoE+/M













































































Результаты поиска

Содержание OmniConverter GPoE+/M

Отзывы:

Похожие инструкции для OmniConverter GPoE+/M

Бренды по названию

Популярные бренды

Omnitron Systems Technology OmniConverter GPoE+/M, Руководство пользователя

Результаты поиска

Содержание OmniConverter GPoE+/M

Отзывы:

Похожие инструкции для OmniConverter GPoE+/M

Бренды по названию

Популярные бренды