Page 35
6.1.14 Restart (RESTART)
The
restart
command provide the ability to restart (warm boot) the switch and enable/disable restart after
the application firmware is upgraded.
Use the
restart
option from the CLI prompt to configure or restart the switch. A list of options is displayed
when the
restart -h
command is entered.
> restart -h
Description:
restart - restart module
Syntax:
restart [-h]
restart -boot [-back]
Switches:
-back swap backup application image to active
-boot warm boot the module
-h display help information
>
The options available using the
restart
command are shown below.
The
-back
switch makes the backup application image active.
The
-boot
switch performs a warm boot on the switch.
The
-h
switch displays the help screen presented above. It is static and provides help information for the
specific command.
To restart the switch, use the
restart -boot
command.
> restart -boot
