OmniPod UST400, Руководство пользователя

Страница: 128 / 202

113
Taking Care of Your PDM and Pod 10 10 Taking Care of Your PDM and Pod
Warning:
The PDM remembers the date and time for up to two hours after
the batteries run out or are removed. After that, the date and time may need
to be reset. If there is an active Pod, it will have to be replaced.
To replace the batteries:
1. Turn the PDM over.
2. Open the battery
compartment on
the back of the PDM
by pushing the
compartment latch
inward and then
upward. No special
tools are necessary.
3. Insert two new
AAA alkaline batteries into the compartment. The diagram inside the
compartment shows you which direction to insert the batteries.
4. Replace the battery door.
5. Turn the PDM face up. The PDM powers on automatically.
The PDM is now ready to use. Dispose of the old batteries in accordance with local
waste disposal regulations.
PDM cleaning and disinfecting
The basics
Cleaning is meant to keep your PDM free from dirt, stains, or impurities;
unsoiled. Disinfecting is the process of destroying pathogenic organisms or
rendering them inert. The validated guidelines below are for cleaning and
disinfection of the PDM.
Always keep your PDM test strip port and USB port free of debris and liquids.
Dirt, dust, blood, and control solution can impair the functionality of your PDM
or damage it.
Caution: Do not use IV Prep wipes, alcohol wipes, soap, detergent, or solvents.
The PDM is not waterproof. Do not immerse it or place it in or near water.
Caution:
If the built-in BG Meter is being operated by a second person who is
providing testing assistance to the user, the BG Meter and lancing device should
be disinfected prior to use by the second person.
The battery
compartment
is on the back
of the PDM.