6.5 Hardware setup
By clicking on the Hardware setup icon
, the hardware setup dialog is opened.
The hardware setup dialog shows the internal connections of
Bode 100
as well as the external
connection to the DUT. Depending on the selected measurement mode, hardware settings such as
Channel termination, Receiver connection or an external Probe factor can be changed by clicking on
the icons shown in the Hardware setup dialog.
Figure 6-5: Hardware setup dialog in Gain/Phase measurement mode.
Depending on the measurement mode, some of the following settings can be changed by the user:
•
Source mode:
Choose between
Auto off
or
Always on
. More details on the source behavior of
Bode 100
can be found in
•
Source level:
Set the constant source level or the reference level when the shaped level function
is used.
•
Receiver bandwidth:
Select the receiver bandwidth used for the measurement.
32
OMICRON Lab
Содержание Bode 100
Страница 1: ...Smart Measurement Solutions Bode 100 User Manual...
Страница 24: ...Figure 6 3 Collapsing the measurement and trace configuration areas 24 OMICRON Lab...
Страница 45: ...Figure 7 3 Context menu of chart Measurement types and applications OMICRON Lab 45...
Страница 83: ...Open B WIC Open B SMC Short B WIC Short B SMC Load B WIC Load B SMC Calibration OMICRON Lab 83...