The following actions can be taken:
•
Click the checkbox
next to the name to switch the memory curve on or off.
•
Right-click the green area and use the context menu to change the memory style or color.
•
Rename the memory by double-clicking on its name
.
•
Update the memory data with the current measurement data by clicking
.
•
Delete the memory trace by clicking on
.
•
Attach the cursors to the memory trace by clicking on
.
•
Use the
Show with
check-boxes to decide if the memory data shall be shown only with one trace
or on both.
Options
The following options can be configured in the memory options. Go to the options dialog
and select
the memory options
:
•
Maximum number of memory traces:
The maximum number of memory traces is by default
limited to 10. If you need more memory curves increase this number.
Increasing the number of memory traces might impact your software performance.
Especially when you use a high number of points and many memory traces.
•
Confirm the deletion of memory traces:
When this checkbox is checked, the software will ask
for confirmation when deleting a memory trace.
•
Default memory line pattern:
Change the memory line styles according to your preference.
•
Alternating memory trace color mode:
Activate this option to color-code the memory curves
with the corresponding trace color. With this mode it is easier to distinguish between multiple
memories when more than one trace is shown in a diagram.
Bode Analyzer Suite functions
OMICRON Lab
113
Содержание Bode 100
Страница 1: ...Smart Measurement Solutions Bode 100 User Manual...
Страница 24: ...Figure 6 3 Collapsing the measurement and trace configuration areas 24 OMICRON Lab...
Страница 45: ...Figure 7 3 Context menu of chart Measurement types and applications OMICRON Lab 45...
Страница 83: ...Open B WIC Open B SMC Short B WIC Short B SMC Load B WIC Load B SMC Calibration OMICRON Lab 83...