Omega UWTC-REC3, Руководство пользователя

Страница: 61 / 70

Appendix F AScII / TeLNeT commANdS TABLe
Command Device / Group ID Description (see notes below if *) Example
ERDB Device ID: 000 – 031 Get sensor readings of Connector/ Get reading for
Transmitter sensor 15, ERDB015
ERDR Device ID: 000 – 031 Get individual reading or parameter Get the first temp. reading
Reading/parameter: a-s *4 for sensor 1, ERDR001c
ERDG Group ID: 00A-00D, ALL Get sensor readings of a group / Get readings for all
*5 groups of sensors group B, ERDG00B
EQNF Device ID: 000 – 031 Get name, *3 status of Connector / Get name, for sensor
Transmitter 15, EQNF015
EQNG Group ID00A-00D, ALL Get name, *3 status of a group / Get name, for all
all groups of sensors sensors, EQNGALL
EQPE Device ID: 000 – 031 Get sleep period, battery voltage, signal Get sleep period, for
strength, success, network address and sensor 15, EQPE015
parent address of Connector/Transmitter
EQPG Group ID: 00A-00D Get sleep period, battery voltage, signal Get sleep period, of
strength, success, network address and group B, EQPG00B
parent address of a group / all groups
of sensors
ESPD Device ID: 000-031, ALL Set the sleep period for Connector/ Set sensor 15’s sleep
Transmitter / all sensors *1 period to 30 seconds,
ESPD015 30
ESNM Device ID: 000 – 031 Set the name of Connector/Transmitter *2 Set the name of
sensor 15, ESNM015 z15
ERST Device ID: 000 – 031, ALL Reset Connector/Transmitter/all sensors Reset all sensors,
ERSTALL
CRST Reset wireless network Reset network, CRST
CSTS Get personal network ID, channel, Get network information,
and the state of network stack CSTS
FACTORY Sets the Receivers Ethernet configur- FACTORY xxxxxxxx
AdminPassword ations to Factory Defaults xxxxxxxx is the Admin
Password
*1 Argument: 1 – 32767 (1 seconds to about 9 hours)
*2 Argument: xxxxxxxx (8 characters)
*3 and *4 See the following page
*5 Refer to
Section 4.5.1 HTTPget using Port 2000
56