PART 6
SPecIFIcATIoNS
INTeRFAce SPecIFIcATIoNS
Ethernet:
Standards Compliance IEEE 802.3 10Base-T (RJ45)
Supported Protocols:
TCP/IP, ARP, ICMP, DHCP, DNS, HTTP, and Telnet
LED Indicators:
Network Activity, Network Link, Diagnostics, Receive and
Power
Management:
Device configuration and monitoring through embedded
WEB server
Embedded WEB Server:
Serves WEB pages (Java™ Applets) containing real-time
data and live updated charts within definable time intervals.
WIReLeSS commUNIcATIoN
Standard:
IEEE 802.15.4, DSSS
Frequency:
2.4 GHz (2410 MHz), 12 Channels
Network Topology:
Star Topology
Radio Power Output:
100 mW (20 dBm), 10 mW (10 dBm)
Limitations on Equivalent Isotropic Radiated Power (EIRP) levels in the
European Community and other countries applies. An improper combination of
power level can result in an EIRP above the allowed amount per regulations.
See
Appendix H
.
Data Rate:
Bit rate 250 Kp/s; Symbol rate 62.5 Symbol/s;
Chip rate 2000 kchip/s
Modulation:
Orthogonal Quaternary Phase Shift Keying (O-QPSK)
Receiver Sensitivity:
-100 dBm
Range:
The range depends on the specific Connector/Transmitter
used. Refer to the
UWTC Manual
for more specifications.
The range assume a Line-of-Sight (LOS) between the Receiver and
Connector/Transmitter without obstructions or interference at which the
diagnostic signal strength web interface registers approximately 25%.
Antenna Frequency:
2400 to 2500 Mhz
Impedance:
50 ohm
Connector:
Reverse Polarity SMA Plug
PoWeR
Power Input:
9 to 12 Vdc
Consumption:
2.5 W max.
Safety Qualified ac Power Adapter (included)
Nominal Output:
9 Vdc @ 0.5 A
Input:
100 to 240 Vac, 50/60 Hz
46
