22-Gauge
Yellow/Black Wire:
(+) Brake Input
Connection Required-
The Yellow/Black wire must be connected.
It
is part a critical safety feature which disables the RS unit whenever the brake
pedal is pressed. Connect the Yellow/Black wire to the brake switch wire which
shows +12 Volts when the brake pedal is pressed. The brake switch is typically
located above the brake pedal, and usually mounted to the brake pedal support
bracket. Always make this connection in a fashion ensuring its long-term reliabil-
ity; soldering is highly recommended. Upon completing the Yellow/Black wire’s
connection, thoroughly test the operation of this circuit.
22-Gauge
Dark Blue Wire:
(-)
Hood Input
Connection Required-
The Hood Safety Switch must be installed and
the Dark Blue wire must be connected.
This prevents operation of the RS
unit if the hood is open.
Carefully install the included pin switch so that it is open (pin down) when the
hood is shut and closed (pin up) when the hood is open. Connect the Dark Blue
wire to the pin switch and carefully route this wire through the firewall, using an
added or existing grommet, avoiding any hot or moving parts.
If there is an existing hood pin switch for an alarm system, you may use it for
11
