19
22-Gauge
Pink Wire:
(-) Start Activation
Input
Connection Required.
The Pink wire is how the RS-3A is activated for
remote start operation. This wire is to be connected to an alternative device such
as an existing keyless entry or alarm system. If the Pink wire receives a Negative
pulse, the RS unit will start the vehicle’s engine, provided that all safety circuits
are in the proper status. After the engine has been started by remote control,
another Negative pulse on the Pink wire will turn the RS unit off, stopping the
engine. Connect the Pink wire to an available auxiliary output of the existing
host system, or if there is no available auxiliary output, the “2 Pulse Activation”
programmable feature may be used to activate the remote start operation. This
feature is typically used with an existing keyless entry system.
Should it be desired to activate the RS unit’s remote start operation from an
existing keyless entry system, programmable feature #6 will configure the Pink
wire to activate the remote start feature only if it receives two Negative pulses
within 10 seconds. This allows configuring the RS unit to remote start when the
OEM transmitter’s “LOCK” button is pressed twice. In most cases the existing
keyless entry system will have Negative switching door lock circuits to which
the Pink wire may be connected directly. In the other cases, an optional relay
is needed to reverse Positive polarity to Negative. When feature #6 is selected
for “two pulse” operation, once the RS unit has started the engine, the Pink wire
