![background image](http://html1.mh-extra.com/html/omega/rs-3a/rs-3a_operating-and-installation-instructions-manual_4034446008.webp)
8
(Two 12-Gauge)
Red Wires:
Co12
Volts Input
Connection Required
.
Connect both Red wires to constant 12 Volts. The
source used must supply adequate amperage. The most common sources are
the battery’s Positive terminal and the ignition switch wiring harness. Good reliable
some Ignition Switches have the electrical
switch as part of the mechanical switch;
oth-
ers have the electrical switch
lower on
the steering column
and connected
to the mechanical
switch by a linkage.
The ignition
switch wiring harness is
the
best source for this and the
ignition #1 and accessory
W I R I N G - 5 Wire Connector
Two Typical “Electrical”
Ignition Switch Locations
OR