background image

05

User Manual

Safety Information

 (Continued)

 

WARNING:

 Incorrect repairs are dangerous. Repairs may 

only be carried out by an authorised service technician or 
a similarly qualified individual.

 

WARNING:

 Never replace a damaged power cable 

yourself. Power cables may only be replaced by an 
authorised service technician or a similarly qualified 
individual. Switch off the circuit breaker in the fuse box 
if the appliance appears faulty, and contact our friendly 
after sales support team for further instructions.

 

Ensure that the appliance is switched off before 
replacing the oven lamp to avoid the possibility of 
electric shock.

 

If the door seal is very dirty, the appliance door will no 
longer close properly during operation. Always ensure 
you keep the seal clean.

 

Do not use harsh or abrasive cleaners or sharp metal 
scrapers to clean the oven door glass, as they may 
scratch the surface which can result in the glass 
shattering. Similarly, do not use steam cleaners.

 

The hob surface is made of toughened ceramic glass: if 
the surface is cracked, switch off the appliance to avoid 
the possibility of electric shock or further damage, and 
contact our after sales support team for guidance.

 

Ensure that this product is disposed of correctly, to 
prevent any possible damage to the environment and 
to human health which might otherwise be caused if the 
appliance were to be disposed of incorrectly.

 

This product may not be treated as normal household 
waste. It should be taken to a collection point for the 
recycling of electrical and electronic goods.

 

As this appliance requires a specialist waste disposal, for 
further information regarding the treatment, recovery 
and recycling of this product please contact your local 
council, your household waste disposal service or the 
store of purchase.

 

To disassemble and remove the appliance, perform the 
installation instructions in reverse order. Always perform 
disassembly with two people to avoid risk of injuries. 
Installation and disassembly must always be carried out 
by either an authorised service technician, or a similarly 
qualified person.

 

Materials used for packaging the appliance include 
those that are environmentally friendly and are 100% 
recyclable. Environmentally materials have been marked 
and can be identified with the appropriate symbol.

 

Ensure you remove all the packaging, taking care to 
discard waste responsibly.

 

Under no circumstances should you install or use a 
damaged appliance.

 

Always move the appliance carefully. Do not use the 
machine door or the handle of your oven when lifting or 
relocating the appliance.

 

The appliance must always be installed by an authorised 
technician or similarly qualified person. Please not that 
the manufacturer is not held responsible for any damage 
caused by defective placement or installation done by an 
unauthorised personnel.

 

To arrange an authorised technician please contact our 
friendly support team at 1300 11 HELP (4357).

 

CAUTION:

 The appliance must be earthed.

 

Ensure the information on the oven’s rating plate agrees 
with the power supply. If not, contact an electrician.

 

Always use a correctly installed shockproof socket.

 

Do not use any multi-plug adapters or extension cables.

 

Connect the mains plug to the mains socket only at the 
end of the installation. Make sure that there is access to 
the mains plug after the installation. Do not connect the 
appliance plug with a power connection board.

 

Do not pull the mains cable to disconnect the appliance. 
Instead pull the plug portion fo the mains cable.

 

Never touch the mains cable or plug with wet hands, 
nor should you touch the oven with wet hands or feet.

 

WARNING:

 If the supply cord is damaged, it must be 

replaced by the manufacturer or its service agent or 
similarly qualified person in order to avoid a hazard.

 

WARNING:

 All electrical work must be done in 

accordance with local and national electrical codes 
as applicable and should be undertaken by licensed 
and qualified persons only. Failure to follow these 
instructions can result in death, fire or electrical shock.

 

The manufacturer is not responsible if incorrect 
installation or use causes injuries and damages.

 

Before installing and using your appliance, carefully read 
the supplied instructions. Always keep the instructions 
with you for future reference.

 

Always wear appropriate clothing when operating the 
oven, such as clothes that cover your torso, legs and feet.

Содержание OFOIC909B

































Отзывы: