Programmable Anti-Carjacking Protection
Page 13
details on the complete line of sensors and help determine which sensor or sensors
are best suited for your needs. Currently many sensors feature dual zone
capability, which take advantage of the security system’s prewarn circuit.
Prewarning Detection Circuit: This circuit requires connection to an optional
dual zone detection device. When the sensor’s prewarn zone is triggered the
security system will respond by chirping the siren for 2 seconds.
The system is equipped with three levels of programmable Anti-Carjacking
protection. The Anti-Carjacking operation may be activated by the ignition, a
combination of the ignition and an open door, or the transmitter. These three forms
of Anti-Carjacking protection are programmable features, which are as received
configured “Off”.
#
1: Anti-Carjacking activated using the transmitter:
If programmable feature
#
13 is “On”, the Anti Car-Jacking operation may be
activated by Pressing & Holding both buttons on the transmitter for 4 seconds while
the ignition is “On”.
#
2: Anti-Carjacking activated by a door:
If programmable feature
#
14 is “On”, the system will initiate the Anti-Carjacking
operation every time a vehicle door is opened and closed while the ignition is “On”.
#
3: Anti-Carjacking activated by the ignition:
If programmable feature
#
15 is “On”, the system will initiate the Anti-Carjacking
operation every time the vehicle’s ignition is turned “On”.
Page 14
Once the Anti-Carjacking process has begun, the user has 63 seconds to press
the Valet/Override Switch in order to cancel the process. If not cancelled, at 55
seconds the siren will begin to chirp for 8 seconds to alert the user that the system
is about to enter into an activated condition. If the Anti Car-Jacking process is not
cancelled before the 63 second countdown expires, the system will fully activate.
In the activated condition the siren/horn will sound, the parking lights will flash,
and at 95 seconds the starter interrupt will engage. Once the system is activated
in the Anti-Carjack mode, the transmitters will NOT stop the operation, nor will the
system reset automatically. Once it is fully activated, the Anti-Carjacking
operation can only be deactivated by:
Step 1: Turning the vehicles’s ignition “Off”.
Step 2: Turning the vehicle’s ignition back “On”.
Step 3: Within 5 seconds Pressing the Valet/Override Switch.
Programmable Features
Page 15
The system has 16 programmable features which allow the system to be custom-
ized to suite many individual needs. The following pages provide a brief explana-
tion for each feature, and notes its factory default setting. If the feature is not an
“on or off” type feature, the transmitter buttons’ functions in programming mode are
noted. Otherwise, pressing the large button turns the feature “on”; pressing the
small button turns the feature “off”.
• = Default Factory Setting
1. Current Sensing: (•On / Off)
- Enables the system to be activated if armed should the system detect a
voltage spike in the vehicle’s electrical system.
2. Current Sensing Activation Delay: (3 Seconds / •3 Minutes)
- Allows option of a longer delay before activation by current sensing can occur.
This is for use in vehicles with equipment, such as cooling fans, which stay
on after the ignition has been turned off.
3. Last Door Arming: (•On / Off)
- Configures the system to automatically arm itself 30 seconds after the last
of the vehicle’s doors is closed.
4. Doors Lock With Last Door Arming: (On / •Off)
- Adds the automatic locking of the vehicle's doors to the previous feature.
5. Automatic Rearming: (•On / Off)
- Configures the system to automatically rearm itself 90 seconds after it has
been disarmed by the transmitter.
6. Doors Lock With Automatic Rearm: (On / •Off)
- Adds the automatic locking of the vehicle's doors to the previous feature.
7. Steady Siren Output Or Pulsed Horn Honk Output: (•Siren / Horn)
- Allows the selection of a constant output to sound the electronic siren or a
pulsed output to properly sound the vehicle's horn. If programming, press the
transmitter’s large button for the Steady Siren setting or press the small button
for the Pulsed Horn setting.
8. Ignition Controlled Door Lock/Unlock: (•On / Off)
- Configures the alarm to lock and unlock the vehicle's doors when the ignition
is turned on and off. This feature does not operate in Valet Mode.
Page 16
