WT28 VELLEMAN
1
WT28 -- MULTIFUNCTIONAL CLOCK
1. Introduction
Thank you for buying the WT28 ! This multifunctional clock does much more than merely display the correct time !
This device is also equipped with several other functions : a calendar, an alarm, a snooze function, temperature
read-out and a backlight.
2. Features
Normal display mode : Hours, minutes, date, month, day of the week and temperature are displayed. Range for
the year setting : 1999 to 2048.
Alarm/snooze mode
: Set the alarm and press
SNOOZE/LIGHT
to activate the snooze mode when the alarm is
sounding.
Time display mode
: 12h- or 24h-mode.
Thermometer
: Displays the temperature in °C or °F.
Backlight
: Enables the user to read the display in the dark.
3. Normal Display Mode
•
Press the
UP/12/24
button to toggle between 12h- and 24h-mode for the time display.
•
Press
DOWN/°C/°F
to toggle between °C and °F for the temperature display
•
Press the
ALM ON/OFF
button at the back of the device to toggle between alarm ON and alarm OFF
•
Press the
SNOOZE/LIGHT
button to activate the backlight for ±3 seconds.
4. Setting the Correct Time
Open the battery compartment at the back of the device and insert two AA-batteries (1.5V). Hold the
TIME/CAL SET
button on the front panel for three seconds until the digits for the hours start to flash.
Note that the digits will change faster if the UP or DOWN button is held
.
Enter the hours with the
UP
or
DOWN
button and confirm the hours with
TIME/CAL SET
. The digits for the minutes
start to flash. Enter the minutes with
UP
or
DOWN
and confirm with
TIME/CAL SET
. The digits for the year start to
flash. Enter the year with
UP
or
DOWN
and confirm with
TIME/CAL SET
. The digits for the month start to flash. Enter
the month with
UP
or
DOWN
button and confirm with
TIME/CAL SET
. The digits for the date start to flash. Enter the
date with
UP
or
DOWN
button and confirm with
TIME/CAL SET
. Note that the day of the week changes
automatically when either the month or the date is adjusted.
5. Setting the Alarm and the Snooze Function
Press the
ALM SET
button to display the current alarm time for ± 10 seconds. Hold the button for three seconds to
activate the alarm setting mode and make the digits for the hours flash. Enter the hours with
UP
or
DOWN
and
confirm with
ALM SET
. The digits for the minutes start to flash. Enter the minutes with
UP
or
DOWN
and confirm with
ALM SET
.
Arm the alarm by pushing the
ALM ON/OFF
button at the back of the device. The
symbol is displayed when the
alarm is armed. Press the button again to disarm the alarm. The alarm will sound for one minute at the entered time.
