Omega CN1001-TC, Руководство пользователя

Страница: 36 / 48

SECTION 23. MENU CONFIGURATION (Continued)
Table 23-1. Configuration Menu (Continued)
(Defaults in Bold and Italics)
32
OT.CF
Output Configuration
Analog Output
P.BND
Proportional Band
Show prior value
entered.
Scroll right one digit.
Change flashing digit's value
Select from 0000 through 9999
Change flashing digit's value
Select from 0000 through 9999
Show prior value
entered.
Scroll right one digit.
M.RST
Manual Reset
0.1
0.2
0.3
0.4
0.5
MENU
/DEV /MAX
Notes: *If you select 0.2=V, you may select your analog output to be
0-10 V or 0-5V by accessing sub-menu 0.5=F or 0.5=H
*If you select 0.3=O, you have access to Output Scale and Offset.
*If you select 0.3=P, you may select your proportional output analog to be
direct 0.4=D (4-20 mA, 0-5V, 0-10v) or reverse acting 0.4=R (20-4 mA,
5V-0V, 10V-0V).
D: Disabled
E: Enabled
V: Voltage analog out
C: Current analog out
A: Retransmission of
temperature
P: Proportional to the error
between display reading and
SP1
D: Proportional analog output
is direct reading
R: Proportional analog output
is reverse acting
F: 0-10 V proportional
H: 0-5 V proportional