37
SECTION 25. SPECIFICATIONS (Continued)
±0.5°C
Temperature Stability
0.04°C/°C
Step Response Time
1 seconds
Warm Up to Rated Accuracy
30 min
ANALOG OUTPUT (if applicable)
Signal Type
Current or voltage
Signal Level Current
10 V max compliance at 20 mA output
Signal Level Voltage
20 mA max for 0-10 V output
Function
May be assigned to a display range or proportional control
output with setpoint #1 when used as a control output.
Linearity
0.2%
Step Response Time
2-3 seconds to 99% of the final value
4-20 mA Load Regulation
1.1%
ISOLATED ANALOG OUTPUT (if applicable)
Same as non-isolated analog output except isolated to 1000 Vdc.
Signal type
Current or voltage
Signal Level Current:
10 V max compliance at 20 mA output
Voltage:
20 mA max for 0-10 V output
Function
May be assigned to a display range or proportional control
output with setpoint #1 when used as a control output.
Linearity
0.2%
Step Response Time
2 - 3 seconds to 99% of the final value
Only one analog output is available on each unit and it must be factory installed.
TRANSISTOR LOGIC OUT
(7 - 11) V ± 0.3 Vdc. Maximum current: 25 mA. Output may be configured as On/Off or Time
Proportional for 0.1 to 199 seconds
PROPORTIONAL CONTROL (TIME OR ANALOG OUT)
Time
Cycle time for 0.1 second to 199 seconds. On/Off time to 99% of
cycle time. Transistor and/or relay outputs. Configurable for
reverse or direct acting. Front-panel tuning capability.
Analog
4-20 mA; 0-10 or 0-5 V out. Configurable for reverse or direct.
Front-panel tuning capability.
ACCURACY AT 25°C
Содержание CN1001-TC
Страница 46: ...42 NOTES...
