Omega CN1001-TC, Руководство пользователя

Страница: 8 / 48

SECTION 5. PARTS OF THE METER
5.1 FRONT OF THE METER
Figure 5-1 shows each part of the front of the meter. Table 5-1 on the next page gives a brief
description of each part.
Figure 5-1. Front-Panel Illustration
1 - Setpoint 1 Status
2 - Setpoint 2 Status
Table 5-1. Front-Panel Part Description
ITEM DESCRIPTION
1 - 1.9.9.9. or 9.9.9.9.
4-digit 14 segment, 0.54" high LED display with programmable decimal point.
2 SETPOINT LED
These LEDs labeled 1 and 2 display the status of setpoints 1 and 2.
3 SETPTS BUTTON
This button functions only in the run mode. When the meter is in the run mode,
press this button to sequentially recall the previous setpoint settings. After
using the
/MAX and /DEV buttons to alter these settings as desired, press
the SETPTS button to store these new values.
Unless you press the SETPTS button within 20 seconds to store your input, the
meter will scroll to setpoint 2 and retain the last value stored.
If the dual relay option is not installed, pressing the SETPTS button will display
“V.-03” which is the meter's software version.
4