OMEGA AIR A-DRY Series, Инструкция по установке и эксплуатации

Страница: 13 / 65

13
MATERIALS
Consoles Steel
Control blocks Aluminium
Tower tubes Aluminium
Panels Steel
Control valve seats Aluminium
Non-return valve Aluminium, Steel, PA (polyamide)
Sealing NBR
Adsorption material Silica gel
Corrosion protection Anodized
Outside protection Powder paint coated (Epoxy-polyester base)
Lubricant Shell cassida grease RLS 2
End-caps PA6
Controller Housing ABS
CORRECTION FACTORS
To calculate the correct flow capacity of a given device based on actual operating conditions,
multiply the nominal flow capacity by the appropriate correction factor(s).
Example: Corrected flow capacity for nominal flow capacity of 36 Nm
3
/h at operating
pressure of 6 bar(g) and inlet temperature of 40 °C would be:
0,88 0, 97 36 ℎ ⁄ 30,73 ℎ ⁄
CORRECTION FACTOR – OPERATING PRESSURE
[bar] 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
[psi] 29 44 59 73 88 103 118 132 147 162 176 191 206 220 235
C
OP
0,38 0,5 0,6 0,75 0,88 1 1,13 1,25 1,38 1,5 1,63 1,75 1,88 2 2,1
CORRECTION FACTOR – INLET TEMPERATURE
[°C] 25 30 35 40 45 50
C
IT
1,00 1,00 1,00 0,97 0,87 0,80