19
Maintenance
LUBRICATION
LUBRICATION OF CARRIAGE SLIDING GUIDES AND PRODUCT HOLDER PLATE (WEEKLY)
•
Apply a few drops of lubricant o the guide rails and slide the assemblies back and forth 3/4 times.
•
Clean where necessary wiping the excess lubricant.
Only use supplied oil (Fig. 28a).
Only use white Vaseline oil (Fig. 28b).
MOTOR BELT TENSION ADJUSTMENT
When after a given time the slicer has an unusual noise because of the belt (30), proceed as follows:
•
Disconnect the plug from the socket.
•
Lift the slicer and place it on its side.
Make sure that the slicer is stable and can not inadvertently fall.
• Unscrew the pins (4).
• Loosen the screw (31) and remove the cover (32).
• Loosen the nut (33) a few turns.
• Rotate the belt tensioner (34) until obtaining a belt optimal tension (30).
• Retighten the nut (33) then reassemble the carter (32), the screws (31) and the feet (4).
Do not over-tighten the belt. In the rotation, the engine could force and the belt may be damaged.
Содержание MS-IT-0300-CE
