![background image](http://html1.mh-extra.com/html/omcan/ms-it-0300-ce/ms-it-0300-ce_instruction-manual_4145919016.webp)
16
Maintenance
MAINTENANCE
The operator may perform the following maintenance operations:
• Blade sharpening: periodically (periodicity and duration depend obviously on the equipment use; working
times and processed material type).
• Lubrication of carriage sliding guides: weekly.
• Lubrication of pusher sliding bar: weekly.
• Visual check of the power cord and of the gland on the machine’s base conditions: periodically.
The maintenance operations must be performed always after disconnecting the machine from
the power network and, if it’s not specifically necessary another position, with the slice thickness
regulation knob on ‘0’.
The maintenance operations to be entrusted to personnel authorized by the manufacturer are the following:
•
Blade replacement.
•
Sharpener’s emery-wheels replacement.
•
Motor belt tension regulation.
•
Motor transmission belt replacement.
•
Underbase wiring’s components replacement.
•
Structural parts repair, underbase components repair.
BLADE SHARPENING
Accurately clean the machine as indicated in the previous paragraphs before proceeding in the operations.
Sharpening can be performed up to a reduction of 12mm of the blade’s diameter nominal. Over that
value IS MANDATORY TO CHANGE THE BLADE entrusting the operation ONLY to personnel authorized
by the manufacturer.
WARNING: Cutting hazard! Use protective cut- and tear resistant gloves and perform all operations
with extreme care. PAY ATTENTION AT ALL TIMES!
Содержание MS-IT-0300-CE
