17
Maintenance
The blade sharpening should be performed periodically, as soon as you feel a decrease in the ability of cutting
blade, it should follow the instructions below:
1.
Carefully clean the blade (10) with denatured alcohol to degrease it after disconnecting the plug from the
socket.
2.
Loosen the knob (20a), lift and rotate 180° the sharpener (20) and insert the wheels on the slicer’s blade.
Tighten the knob (20a).
3.
Trigger the switch (1) and press the little button (x2).
4.
Allow the blade to rotate for about 30 to 40 seconds and then use the switch (2) to stop it checking with a
slight shift (using a pencil) to the outside of the blade if the burr is formed.
We recommend to perform this check very carefully as the blade is very sharp.
Содержание MS-IT-0300-CE
