20
Maintenance
Troubleshooting
The following information is intended to aid in identifying and correcting defects and faults that may occur
during use of the machine.
Some failures can be resolved by the user; others require precise technical skills or special skills, and
must be carried out by qualified personnel with recognized expertise and experience in the specific
area of intervention.
Do not disassemble the internal parts of the slicer. The manufacturer declines all responsibility for any
damage caused by tampering.
The table below shows the most common problems that occur during the use of the slicer and the operations
required to eliminate the possible causes.
PROBLEM
CAUSES
SOLUTION
Pressing the green or white button
the machine will not start.
No power supply.
Check that the plug is properly
inserted.
Defective electrical control circuit.
Call technical assistance.
Pressing the green or white button
the machine starts, but will not turn
the operation light on.
Defective indicator.
Do not use the machine with light
indicator off; consult promptly the
customer service.
Содержание MS-IT-0300-CE
